H4/9003 Headlight Relay Kits
If you own a 20, 30, 40, or even 50 year old vehicle, one of the problems that you face is poor lighting. Poor lighting is not an inconvenience, it’s a safety issue! So how do you improve your classic vehicle's lighting? Should you replace the headlights? Replace them with higher wattage units? Actually neither . . . and higher wattage bulbs could actually damage your wiring harness - a bad thing! Our H4/9003 Headlight Relay Kits are designed to allow your stock headlights to perform to their fullest. Our 19 piece kit is plug-and-play and includes everything you need to install it. |
 |
Click to Enlarge |
An easy way to tell if your stock headlights are not performing optimally is if they appear to have a yellow hue to them when the vehicle is running. This is an indication that they are not getting the power from the vehicle’s electrical system that they require to work properly. This is because the vehicle wiring harness, the headlight switch, the HI/LOW beam switch, and the connectors to the headlights themselves experience wear over time. This causes a loss of voltage and excessive heat in the headlight circuit resulting in dim headlights.
Our H4/9003 Headlight Relay kits totally eliminate the voltage drop (and resulting heat) caused by this by allowing your stock components and wiring harness to power only the coils of the relays – these require approximately 2% of the power that a pair of headlights requires! The net result is that your headlights will work like new – even better than new. After the installation, your stock headlights will be bright white with the vehicle running!
Installation is plug-and-play and does not require cutting or splicing into your stock wiring harness. You’ll wonder how you got along without it . . .
We offer two kits:
- The HRK1 – for vehicles with single dual filament HI/LOW beam mounted on each side. It is compatible with bulbs of up to 200 Watts per filament.
- The HRK2 – for vehicles with a dual filament HI/LOW beam and single filament HI beam bulb on each side. The harness included in this kit is pre-wired to accommodate dual filament HI/LOW beam bulbs in both locations for additional headlight brightness if that is desired. It is compatible with bulbs of up to 100 Watts per filament.
Either kit includes the following:
- (1) Pre-assembled Harness, loomed in Semi-Rigid Split Braid tubing, and terminated with OEM style connectors
- (2) 40 Amp Hella Waterproof Relays
- (1) ATC Waterproof Fuse Holder & 30 Amp ATC fuse
- (4) #10 Zinc Plated Self Tapping Hex Washer Head Screw – 1/2" Long
- (2) #10 Zinc Plated Internal/External Star Washers
- (3) Cable Ties – 5.5” long, black
You absolutely, positively will not have to run to the hardware store to install this kit. How do we know? Simple - because we’ve actually installed them ourselves.
PRICING
| HRK1 | H4/9003 Headlight Relay Kit for vehicles with single dual filament HI/LOW beam mounted on each side, complete as shown | $149.95 |
| HRK2 | H4/9003 Headlight Relay Kit for vehicles with a dual filament HI/LOW beam and single filament HI beam bulb on each side | $169.95 |
In addition, we include the following Headlight Relay Kit Extensions. These extensions are designed to plug directly into the harness of either the HRK1 or HRK2 to extend the main power lead. No special tools are required to install them. Each kit includes cable ties for a neat installation.
| HRKEXT3 | 3 foot power lead extension – ideal for vehicles with the battery or a power point located near the firewall, wiring is 10 AWG. | $15.95 |
| HRKEXT6 | 6 foot power lead extension – ideal for vehicles with an auxiliary fuse panel located on the interior side of the firewall. Wiring is 10 AWG and one end is terminated with a #8 fork terminal for connection to the fuse panel. | |
$17.95 |
||
| HRKEXT17 | 17 foot power lead extension – ideal for vehicles with the battery located in the rear or in the trunk. Wiring is 8 AWG due to the length of the run. This kit includes an 8 AWG MAXI style fuse holder and 30 Amp MAXI style fuse. | $56.95 |
DOWNLOAD INSTALLATION INSTRUCTIONS
Call or Email to order your kit today!